EN 10025 S275JR
EN10025 S275JR is the general standard specification for most construction applications.
With a Tensile Strength of between 430 N/mm to 580 N/mm and a minimum Yield Strength of 275 N/mm , depending on thickness, it has good welding and cutting properties making it an excellent choice for all general fabrication requirements.
Clarkes of Stillington hold a stock from 5mm to 140mm thick and a plate size from 2000 x 1000 up to 12000 x 3000 depending upon thickness.
With tailored sizes available from our forward ordered tonnage with EU based steel mills.
2
2
2
EN10025 S275JR Chemical Composition
Designation
EN10025 S275JR Mechanical Composition
Note: For Plate, strip and wide flats with widths ≥600 mm the direction transverse (t) to the rolling direction applies. For all other products the values apply for the direction parallel (I) to the rolling direction.
Note: 1MPa = 1N/mm
2
Designation
Minimum Yield ReH MPa Strength Nominal Thickness mm
Tensile Strength Rm MPa Nominal Thickness mm