EN 10025 S355NL

EN10025 S355NL combines the higher Yield and Tensile properties of S355J2+N, but with additional Impact properties at -50 Deg C.

 

This enables the steel to keep its characteristics at extremely cold locations such as the arctic or offshore applications.

 

Clarkes of Stillington hold a stock from 15mm to 130mm thick and a plate size from 2000 x 1000 up to 12000 x 2000 depending upon thickness.

 

With tailored sizes available from our forward ordered tonnage with EU based steel mills.

1/10

EN10025 S355NL Chemical Composition

  Designation  

EN10025 S355NL Mechanical Composition

  Designation  

Note: For Plate, strip and wide flats with widths ≥600 mm the direction transverse (t) to the rolling direction applies. For all other products the values apply for the direction parallel (I) to the rolling direction.

Note: 1MPa = 1N/mm

2

  Minimum Yield Strength ReH MPa Nominal Thickness mm  

Note: For Plate, strip and wide flats with widths ≥600 mm the direction transverse (t) to the rolling direction applies. For all other products the values apply for the direction parallel (I) to the rolling direction.

Note: 1MPa = 1N/mm

2

  Tensile Strength Rm MPa Nominal Thickness mm  

Note: For Plate, strip and wide flats with widths ≥600 mm the direction transverse (t) to the rolling direction applies. For all other products the values apply for the direction parallel (I) to the rolling direction.​

  Minimum Percentage Elongation After Fracture %                                        Nominal Thickness mm